FIRE STOP 200/30 is the fastest solution for extinguishing fires in urban areas and in hard to reach places (historical centers, high traffic areas, mountainous areas), where the size of the equipment is of major importance.
Due to its small size, the FIRE STOP 200/30 is ideal for use on board small cars or ships.
FIRE STOP 200/30 is characterized by its versatility, so it can be used with fire extinguishing products (medium expansion foam) with variable percentages for mixing with water. It is equipped with 2 suction devices for extinguishing products (foam):
- 1 device located in the water aspirator at the inlet of the high pressure water pump
- 1 device located on the high pressure line after the pump
FIRE STOP 200/30 uses a new technique, based on the consumption of a minimum amount of atomized water, as a consequence of the high pressure provided by the piston pump. Pressurized water quickly turns into steam and absorbs the heat produced by the fire. This system eliminates the damage caused by the large quantities of low-pressure water jets that are normally used.
| POS. | COMPONENT | DESCRIPTION |
|---|---|---|
| 1 | Framework | Painted steel RAL 3000. Dimensions: 1020x550x610 mm, including lance and hose holder. The frame is provided with 4 handles for lifting and transportation. |
| 2 | Pressure regulating valve | Allows pressure regulation between 30 and 200 bar (435-2900 psi) and water recirculation when the unit is in operation and the lance is closed. |
| 3 | Thermostat valve | Protects the pump from possible overheating caused by recirculation of water in the pump, when the group is functional and the lance is closed. |
| 4 | Intake water filter | In general, it allows filtering of the intake water in the high-pressure pump. It is made of brass and the filter is made of stainless steel. |
| 5 | Pressure gauge | Pressure gauge for water pressure in glycerine bath with scale 0-250 bar (0-3625 psi) |
| 6 | Intake systems for fire extinguishing products | The two devices allow the use of a wide range of flame retardants (foam) with different mixing percentages with water. Each device has its own suction line with filter and valve. |
| 7 | Battery | The electric starting of the motor is possible with this battery (placed and fixed in the frame). Features: 12V/45Ah. |
| 8 | Manual hose reel | Manual, equipped with 20 m hose, resistant to high pressure. Can support a maximum of 50 m of hose. |
| 9 | High pressure resistant hose | The hose length is 20 m. |
| 10 | High pressure hoses for fire fighting | Equipped with a pistol, it allows to throw a water jet or a mixture of water and fire-retardant foam. The distance of the water jet or foam is about 20 m. |
| 10.1 | Fire extinguishing nozzle | In order to create a jet of water or a mixture of water and fire-retardant foam , the nozzle can operate in 2 different modes: long distance jet and short distance expanded jet. |
| 10.2 | Atomizer | The atomizer (for water only) lowers the temperature of the flames thus helping to extinguish the fire. |
| 11 | Fuel tank | Made of stainless steel, it has a capacity of approx. 6 liters, allowing a continuous operation of the group for at least 1,30 hours. |
| 12 | Water tank | It has a capacity of 120 liters. The tank is located on top of the
group and is delivered with its own fastening bracket, but
can be quickly detached.
Tank height 450 mm.
The tank can be easily dismantled after emptying. The tank is equipped with: a) Visual water level indicator b) Ø35 water filling connection c) Supply and connection hose d) Cleaning opening e) Drain plug |
| 13 | Fire retardant tank holder | Allows the placement of a tank or reservoir containing fire retardant. |
| 14 | Trolley with wheels | Trolley with 2 wheels of 300 mm diameter, easy to disconnect. |
| 15 | Chemical tank | Fire retardant |
The different functionalities of the FIRE STOP:
- Operating phase only with atomized water in micro droplets that saturate the room
- Water + foam operating phase with half-open half-open jet at reduced pressure
- Water only or high pressure water + foam phase
- Water + foam phase with micropatches for fast coverage of the area of interest
| Engine type: | 2-cylinder gasoline |
| Motor current: | 14,7kW (20HP) |
| Motor Rpm: | 3250/minut |
| Starting: | Electric (+ manual emergency start) |
| Starter battery: | 12 V 45 Ah |
| Pump type: | with 3 ceramic pistons |
| Pump specifications: | 200 bar – 30 liters/minute (2900psi – 7.9 gpm |
| Capacity of water and foam tanks: | 120 liters H2O – 30 liters foam (31.7 gal – 7.9 gal) |
| Operating pressure: | 160-200 bar (2320-2900 psi) |
| Range for H2O: | 16-17 m (direct jet) – 8 meters (diffuse jet) 52.4-55.7 – 26.2 ft) |
| Range for H2O/Soam: | 16-17 m (direct jet) 52.4-55.7 ft) |
| Capacity for H2O/Foam: | approx. 30 l/min. water (7,9gpm) Max 3 l/min. foam* (0.8 gpm) |
| Size and weight without trolley or tanks: | 900X500X600 (H) mm KG 136 |
| Size and weight with trolley or tanks (empty): | 1320X700X1200 (H) mm KG 175 |
| Hose length: | 20 meters |
- up to 3% for mineral oils
- up to 6% for polar solvents
